Network Menu - Brother DCP-J525W Basic User's Manual

Network menu

Level1 Level2
Network TCP/IP
Setup Wizard
WPS/AOSS
The factory settings are shown in Bold with an asterisk.
64
Downloaded from ManualsPrinter.com Manuals
Level3
BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS Config
WINS Server
DNS Server
APIPA
—
—
Network User's Guide
Options Descriptions
Chooses the BOOT
Auto*
method that best suits
Static
your needs.
RARP
BOOTP
DHCP
[000-255]. Enter the IP address.
[000-255].
[000-255].
[000-255]
[000-255]. Enter the Subnet mask.
[000-255].
[000-255].
[000-255]
[000-255]. Enter the Gateway
address.
[000-255].
[000-255].
[000-255]
Enter the Node name.
BRWXXXXXXXXXXXX
Chooses the WINS
Auto*
configuration mode.
Static
Specifies the IP address
(Primary)
of the primary or
000.000.000.000
secondary WINS server.
(Secondary)
000.000.000.000
Specifies the IP address
(Primary)
of the primary or
000.000.000.000
secondary DNS server.
(Secondary)
000.000.000.000
Automatically allocates
On*
the IP address from the
Off
link-local address range.
— You can manually
configure your print
server for a wireless
network.
— You can easily configure
your wireless network
settings using the one-
button push method.
C
Page
See .