Bowden Tube - Ultimaker ORIGINAL+ Assembly Manual

BOWDEN TUBE

PARTS NEEDED
Bowden pack
1 1097 Bowden tube
1 1266 Spiral sleeve
The bowden tube has one end marked with blue tape. This end has been slightly drilled out to make the inserting of
material easier.
1. Take the bowden tube and place the end with the blue tape into the feeder quick fit coupling. Fig. 224.
2. Place the clamp clip around the tube coupling collet to lock the bowden tube in place. Fig 225.
80
Feeder pack & hot end pack
2 1071 Clamp clip
224
223
225