Using The Gas Hob; Before First Use; Switching The Hob On - Venini VCG60S Manual

Using the gas hob

Before first use

IMPORTANT: You should clean the hob surface
(see "Cleaning and maintenance" section).

Switching the hob on

The following symbols will appear on the control panel, next to each
control knob:
= gas off
Large flame: maximum setting
Small flame: minimum setting
o The minimum setting is at the end of the anti-clockwise rotation of
the control knob.
o All operation positions must be selected between the maximum and
minimum position.
o Never select a knob position between the maximum and off
position.
o The symbol on the control panel next to the control knob
will indicate which gas burner it operates.
To ignite a burner:
o Press in the control knob of the burner that you wish to light and
turn it anti-clockwise to the maximum position.
o If you keep the control knob depressed, the automatic ignition
for the burner will operate.
o You should hold down the control knob for 20 seconds after the
flame on the burner has lit.
o After this 20 second interval, turn the control knob to your
required setting between the maximum and minimum setting
symbols.
o To switch the burner off, turn the control knob fully clockwise to
the gas off position.
10