Maintaining The Enamelled Pan Stands; Installation - Venini VCG60S Manual

o After cleaning and washing them, wipe and dry them carefully.
o Before placing the burners back on the hob top, make sure that
the gas jet is not blocked.
o IMPORTANT: Make sure that you reassemble the burners in the
original way.

Maintaining the enamelled pan stands

o IMPORTANT: Make sure that the hob surface and pan stands
have cooled before you attempt to touch them.
o Wipe the pan stands over with a soft, damp cloth that has been
put into warm soapy water. The cloth should be wrung out after
being taken out of the soapy water.
o Using a paper towel, thoroughly dry the pan stands.

Installation

The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o Gas Safety and Measurement Regulations 2010
o AS/NZS 3000 Wiring Rules
o Electricity Safety Regulations 2010
o The manufacturer's Installation Instructions
13