Recommendations From Lenco; Trouble Shooting; Troubleshooting - LENCO L-90 User Manual

Wooden turntable with usb connection and built-in pre amplifier
Hide thumbs Also See for L-90:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Recommendations from Lenco

 Clean your records with a rag, impregnated with an antistatic product.
 Replace the stylus approximately every 250 playing hours. An old cartridge
wears out the records much faster.
 Clean the stylus regularly with a soft brush dipped in alcohol.
When transporting the turntable, do not forget to place the protective cap on the
stylus and put the clip of the armrest on the tone arm.

Trouble shooting

Problem
Does not play / platter does not rotate
Tone arm does not touch the platter
The sound is distorted
The record skips
The last part of the record isn't played
The auto return function does not work
No or distorted sound while recording
records via Audacity
 
 
Solution
Check if the power cable is connected to
the AC wall outlet.
Check if the main power switch, on the
backside of the turntable, is switched on.
Check if the belt is mounted correctly.
Check if the tone arm lever is lowered.
Check if the stylus protection cover has
been removed.
Check if the RPM set is set correctly
Check if the audio cables are properly
connected, i.e. that they are NOT
connected to a phone connection.
Check the needle pressure and Anti-
Skating.
Clean the needle with a soft brush
dipped in alcohol.
Check the needle pressure and Anti-
Skating.
Set the auto return switch to off.
Set the auto return switch to on.
Check the computer and Audacity
settings.
24
 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents