Power Wave 345 Technical Specifications - Lincoln Electric POWER WAVE 345 Operator's Manual

Connect the machine to the input supply according to this manual. If disturbances occur if may be necessary to take
additional precautions such as filtering the input supply.
The output cables should be kept as short as possible and should be positioned together.
If possible connect the work piece to ground in order to reduce the electromagnetic emissions. The operator must
check that connecting the work piece to ground does not cause problems or unsafe operating conditions for personnel
and equipment.
Shielding of cables in the work area can reduce electromagnetic emissions. This may be necessary for special
applications.

POWER WAVE 345 Technical Specifications

Input Voltage
230 / 400 V
3 phase
Duty Cycle (acc. EN60974-1)
(Based on a 10 min. period)
35%
60%
100%
Welding Current Range
5 – 350 Amps
Heigth (mm)
880
Operating Temperature
–20°C to +40°C
For any maintenance or repair operations it is recommended to contact the nearest Lincoln technical service center.
Maintenance or repairs preformed by unauthorized service centers or personnel will null and void the manufacturers
warranty..
INPUT
RATED OUTPUT
OUTPUT RANGE
DIMENSIONS
Width (mm)
680
Frequency
50 Hertz (Hz)
Output Current
350 A
300 A
230 A
Auxiliary Power
230V AC (water cooler)
Length ( mm)
1100
Storage Temperature
-25°C to 55°C
7
Weight ( Kg)
135 (air)
162 (water)