Key Clicks; Disable Logging; Testing - Nortel i2021 Series User Manual

Key Clicks

Key clicks can be enabled or disabled by pressing MENU, and dialing 96
on the touchtone keypad.

Disable Logging

Call logs can be disabled completely so that no calls will log, or, they can
be disabled so "shared" Call Appearances will not log.
DISABLING CALL LOGS COMPLETELY
To disable Call Logging so NO calls will log, press MENU and dial 97 on
the touchtone keypad. Press Yes to disable call logging. Press No to
enable call logging.
DISABLE CALL LOGS ON SHARED CALL APPEARANCE
Call Logs can be disabled on Shared Call Appearances by changing the
Shared Call Appearances from Prime Call Appearances to General Call
Appearances.
To change Prime Call Appearances to General Call Appearances, press
MENU, MORE, MORE, Config, MORE, PrimCA. For further information,
see "PrimCA (Primary Call Appearance)".
NOTE: Remember, changing a Prime CA to a General CA,
removes it from the Call Appearances that will be
answered by Ringing Line Preference.

Testing

You can test the operation of your Teleset by using a simple, built-in
diagnostic procedure. To begin, follow these steps.
1. Press MENU, MORE, Test
i2021 ISDN Teleset
63