Microhard Systems IPN4G Operating Manual page 4

Important User Information (continued)
Regulatory Requirements
To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance
of 23cm or greater for the IPn4G utilizing a 3dBi antenna, or 3.5m or greater for the IPn4G
utilizing a 34dBi antenna, should be maintained between the antenna of this device and persons
during device operation. To ensure compliance, operations at closer than this distance is not
recommended. The antenna being used for this transmitter must not be co-located in conjunction
WARNING
with any other antenna or transmitter.
This device can only be used with Antennas approved for this device. Please contact
Microhard Systems Inc. if you need more information or would like to order an antenna.
WARNING
MAXIMUM EIRP
FCC Regulations allow up to 36dBm Effective Isotropic Radiated Power (EIRP).
Therefore, the sum of the transmitted power (in dBm and not to exceed +30dBm)), the
cabling loss, and omnidirectional antenna gain cannot exceed 36dBm.
WARNING
© Microhard Systems Inc. 4