Matrox Mxo2 Presets For Final Cut Pro; Creating And Editing Mxo2 Sequence Presets; Creating And Editing Mxo2 Capture Presets - Matrox MXO2 Installation And User Manual

Matrox MXO2 presets for Final Cut Pro

You can create a new MXO2 sequence, capture, and device control preset, or edit
an existing preset. For detailed information on presets, see your Final Cut Pro
documentation.

Creating and editing MXO2 sequence presets

Open Final Cut Pro and choose Final Cut Pro > Audio/Video Settings .
1
Click the Sequence Presets tab.
2
Select the sequence preset that you want to use as a starting point for
3
creating a new preset, or select the sequence preset that you want to edit.
Click Duplicate to create a new preset, or click Edit .
4
¡ Important If you click Edit , the preset that you selected in step
overwritten.
In the Sequence Preset Editor window, select your settings. To be
5
compatible with Matrox MXO2, you must select 48 kHz and 24-bit under
Audio Settings
Type an appropriate Name and Description .
6
Click OK .
7
If you're editing a sequence preset, click OK in the Audio/Video Settings
8
window to save your edits.

Creating and editing MXO2 capture presets

Open Final Cut Pro and choose Final Cut Pro > Audio/Video Settings .
1
Click the Capture Presets tab.
2
Select the capture preset that you want to use as a starting point for creating a
3
new preset, or select the capture preset that you want to edit.
Click Duplicate to create a new preset, or click Edit .
4
¡ Important If you click Edit , the preset that you selected in step
overwritten.
In the Capture Preset Editor window, select your settings. To be
5
compatible with Matrox MXO2, the capture preset must have the following
settings:
Under QuickTime Video Settings , select a Matrox Digitizer and Input
$
setting that matches the format of the video that you want to capture.
¦ Note
If this occurs, you will not be able to set the Input option from the Capture
Preset Editor
message, and under QuickTime Video Settings , click Advanced . In the
on the General pane.
A General Error message may appear when you select the digitizer.
window. To set the capture input option, close the error
Matrox MXO2 presets for Final Cut Pro
41
3 will be
3 will be