Defining Your Settings In The Matrox Mxo2 Preferences Window - Matrox MXO2 Installation And User Manual

In Final Cut Pro User Data, drag the Final Cut Pro N Prefs.fcset, Final Cut
6
Pro Obj Cache.fcmch, and Final Cut Pro Prof Cache.fcpch files to the Trash.
¦ Note
number.
Open Final Cut Pro and ensure that it is running properly. If it is, empty the
7
Trash.
Reset your Final Cut Pro settings, such as scratch disk, keyboard, and
8
sequence settings.
Defining your settings in the Matrox MXO2
preferences window
The Matrox MXO2 preferences window allows you to specify various settings
for working with MXO2. You can also view information about MXO2, such as
the serial number and software version.
¡ Important Before defining your settings, you must make sure that you've
installed your MXO2 hardware (see
page 6), powered your MXO2 (see
connected your MXO2 to your Mac system (see
Mac system"

Defining your settings in the Matrox MXO2 preferences window

The N in Final Cut Pro N Prefs.fcset refers to Final Cut Pro's version
on page 12).
"Installing your Matrox PCIe adapter"
"Powering MXO2" on page 10), and
"Connecting MXO2 to your
25
on