Installing Your Pcie Host Adapter (Mac Pro); Installing Your Pcie Host Expresscard/34 Adapter (Macbook Pro) - Matrox MXO2 Installation And User Manual

Installing your PCIe host adapter (Mac Pro)

The Matrox PCIe host adapter is designed to operate in your Mac computer's
PCIe slot. For detailed instructions on how to perform the following steps, refer
to your Mac documentation.
Shut down your Mac Pro, unplug the power cord and all the cables from the
1
computer, and open the Mac Pro by removing the side panel.
Insert the Matrox PCIe host adapter in an available PCIe slot in your Mac
2
Pro, and secure the adapter into place.
Replace your Mac Pro's side panel, and reconnect the power cord and all the
3
cables to the computer. Don't turn on your computer until after you've
supplied power to MXO2 (see
connected it to your Mac Pro (see
on page 12).
Installing your PCIe host ExpressCard/34
adapter (MacBook Pro)
The Matrox PCIe host ExpressCard/34 adapter is designed to operate in your
MacBook Pro's ExpressCard/34 slot. You can install the Matrox PCIe host
ExpressCard/34 adapter when your MacBook Pro is on or off. Connect the
Matrox PCIe cable to the host ExpressCard/34 adapter (see
to your Mac system"
MacBook Pro's ExpressCard/34 slot until the adapter clicks into place. For
details on how to safely remove your Matrox PCIe host ExpressCard/34 adapter
from your MacBook Pro, see
adapter" on page 8.
A
Matrox PCIe
ExpressCard/34
PCIe
adapter
cable
"Powering MXO2"
"Connecting MXO2 to your Mac system"
on page 12), and then insert the host adapter in your
"Removing your PCIe host ExpressCard/34
ExpressCard/34 slot
on page 10) and
"Connecting MXO2
A
Installing your Matrox PCIe adapter
7