Specifying Your A/V Input Settings; Specifying Your Video Output Settings - Matrox MXO2 Installation And User Manual

28
Use the horizontal and vertical settings under Video Output Timing Offset
5
to adjust the timing of the video output relative to your external genlock
source. This lets you compensate for cable delays within your system.

Specifying your A/V input settings

You can select the MXO2 video and audio inputs to be used as your capture
source. Only one video and audio input source can be used at a time. For
descriptions of the MXO2 inputs, see
¦ Note
From the Apple menu, click System Preferences , and then click the
1
Matrox MXO2
Click A/V Input .
2
Under Video Input Source , select the type of video input that you want to
3
capture.
Under Audio Input Source , select the type of audio input that you want to
4
capture.
¡ Important The SDI embedded audio option can be used only with the
SDI

Specifying your video output settings

MXO2 features five simultaneous video outputs that allow you to send your
video to a variety of devices at the same time. Additionally, MXO2 provides two
separate video output channels to choose from: main channel and SD channel.
Chapter 4, Installing Your MXO2 Software and Configuring Your System
The HDMI video input does not support SD video for capture.
icon.
video input option.
"Inputs" on page 14.