Installing Your Matrox Mxo2 Software; Removing Your Matrox Mxo2 Software; Removing Mxo2 Presets And Easy Setups From Final Cut Pro - Matrox MXO2 Installation And User Manual

24

Installing your Matrox MXO2 software

You can install the MXO2 software on a computer with or without the MXO2
hardware installed or connected. If you plan on working with Final Cut Pro, you
should install Final Cut Pro before installing the MXO2 software. For
information on installing Final Cut Pro, see your Final Cut Pro documentation.
To download and install the latest version of the MXO2 software, visit the MXO2
Support section of our website at www.matrox.com/video/support. You can also
contact your MXO2 dealer for the latest software.

Removing your Matrox MXO2 software

In the Finder menu, choose File > New Finder Window .
1
Choose Applications > Matrox MXO2 Utilities > MXO2 Software
2
Uninstaller
In the Matrox MXO2 Software Uninstaller dialog box, select or clear the
3
Delete the Matrox MXO2 user preferences
current user settings in the Matrox MXO2 preferences window will be
removed from your computer. Clear this option if you wish to keep your
current MXO2 user settings for a future MXO2 software installation.
Click Continue .
4
Enter your administrator password, and click OK to remove the MXO2
5
software from your computer.
Removing MXO2 presets and Easy Setups from
Final Cut Pro
After uninstalling the Matrox MXO2 software, the MXO2 presets (sequence,
capture, device control) and Easy Setups may still appear in Final Cut Pro.
Perform the following steps to remove the MXO2 presets and Easy Setups from
Final Cut Pro.
¡ Important Final Cut Pro will return to default settings after removing the
MXO2 presets and Easy Setups.
Quit Final Cut Pro.
1
In the Finder menu, choose Go > Home .
2
Choose Library > Preferences .
3
In Preferences, drag the com.apple.FinalCutPro.plist file to the Trash. If
4
com.apple.FinalCutPro.plist does not appear in the Preferences folder,
proceed to the next step.
¡ Important Do not empty the Trash until instructed to do so.
5 In Preferences, open the Final Cut Pro User Data folder.
Chapter 4, Installing Your MXO2 Software and Configuring Your System
.
option. When selected, all