Nortel Ethernet Routing Switch 8010 Installation Manual page 15

Electrical Specifications
System Line Frequency
System with one power supply or two supplies in redundant configuration:
System with two power supplies (nonredundant) or three supplies in redundant configuration:
Electromagnetic Immunity
RF Susceptibility:
Electrostatic discharge (ESO):
Electrical Fast Transitions (EFT/B):
Electromagnetic Emissions
Meets requirements of:
Safety Agency Approvals
UL Listed
CUL Approved
CB report and certificate
NOM Approved
47 to 63 Hz
Input Volt Amperes Rating: 1,236 VA maximum
Input Power: 1,112 W maximum
Input Voltage: 100-240 VAC
Input current: 12 to 6 A per line cord
Thermal rating: 3,792 BTU per hour maximum
Input Volt Amperes Rating: 2472 VA maximum
Input Power: 2224 W maximum
Input Voltage: 100-240 VAC
Input current: 12 to 6 A per line cord
Thermal rating: 7584 BTU per hour maximum
IEC801-3, Level 2
IEC801-2, Level 2/3
IEC801-4, Level 1/2
(USA) FCC CFR 47 Part 15, Subpart B, Class A
(Canada) ICES-003, Issue-2, Class A
(Australia/New Zealand) AS/NZS 3548:1995, Class A
(Japan) VCCI V-3/97.04, Class A
(Taiwan) CNS 13438, Class A
EN 55 022 (CISPR 22:1985), Class A
CE Mark
11