Table of Contents
Advertisement
Port Mirroring Configuration
The Port Mirroring Configuration screen allows you to configure a specific switch
port to monitor up to two specified ports or two MAC addresses. You can specify
port-based monitoring or address-based monitoring. In a stack configuration, you
can monitor ports that reside on different units within the stack.
For more information about the port mirroring feature, see
(Conversation
Figure 3-20
configuration, where port 12 (in stack unit 3) is designated as the monitoring port
for ports 5 and 6 of stack unit 4. When installed as a standalone switch, the screen
does not display the (Unit/) field designation.
Choose Port Mirroring Configuration (or press i) from the Switch Configuration
Menu screen to open the Port Mirroring Configuration screen.
Port mirroring configuration has taken effect.
Currently Active Port Mirroring Configuration
---------------------------------------------
Monitoring Mode:
Unit X:
4
Port X:
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-20.
Port Mirroring Configuration Screen
302401-D Rev 00
Steering)" on
shows an example of a Port Mirroring Configuration screen, in a stack
Port Mirroring Configuration
Monitoring Mode:
Monitor Unit/Port:
Unit/Port X:
Unit/Port Y:
Address A:
Address B:
-> Port X
or
5
Unit Y:
4
page
1-76.
[
-> Port X
[ 3/12 ]
[ 4/5
]
[ 4/6
]
[ 00-00-00-00-00-00 ]
[ 00-00-00-00-00-00 ]
Port Y ->
Monitor Unit:
Port Y:
6
Press Ctrl-C to return to Main Menu.
Using the Console Interface
"Port Mirroring
or
Port Y ->
3 Port: 12
]
3-45
Advertisement
Chapters
Table of Contents
