Table of Contents
Advertisement
Return to idle status
Reverting to idle status from anywhere in
the menu:
Press the end call key a and hold
u
down or
u
Press no key: The display
automatically reverts to the idle status
after 2 minutes.
Changes which you have not confirmed/
stored by pressing
OK
will be rejected.
Save Entry
OK
The display in idle status is shown on
page 1.
Notes on the operating
instructions
The following symbols are used in these
operating instructions:
Copy Entry/Copy List
Choose one of the two menu
functions (the slash / means
"or").
~
Enter numbers or letters.
The current functions for the
Save
display keys are shown reverse
highlighted and are offered in
the bottom display line. Press
the display key underneath to
launch the function.
q
Press the top or bottom of the
control key (scroll up or
down).
r
Press the right or left side of
the control key (e. g. select
setting).
c/Q/ * etc.
Press the handset key shown.
,
,
,
or
Yes
Save
Send
The operating instructions show the steps
you have to take in abbreviated form. This
is shown below using "Handsfree Volume
setting" as an example:
¢
v
ï
Handset Volume
Select and press
r
Select volume.
Press the display key.
Save
a
Long press (idle status).
1. With the handset in idle status, press on
the right of the control key to open the
main menu.
Use the control key to move to the
ï icon. This is done by pressing the
appropriate arrow on the control key.
Audio Settings appears on the top line of
the screen. Confirm the selection by
pressing the display key
the Audio Settings menu.
2. Press the bottom of the control key
repeatedly until the menu function
Handset Volume
is selected, and confirm
the selection with
3. Press the left (quieter) or right (louder)
side of the control key to select the
required volume.
4. Press the display key under
the change.
5. Press and hold the end call key to return
to the idle status.
Operating the telephone
(1.)
(2.)
.
OK
(3.)
(4.)
(5.)
. You will see
OK
.
OK
to apply
Save
9
Advertisement
Table of Contents
