Functional Description - Bosch GCO 2000 Professiona Original Instructions Manual

OBJ_BUCH-1063-002.book Page 22 Tuesday, August 24, 2010 10:05 AM
22 | English
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Symbols
The following symbols can be important for the
operation of your power tool. Please memorise
the symbols and their meanings. The correct in-
terpretation of the symbols helps you operate
the power tool better and more secure.
Symbol Meaning
Keep hands away from the
cutting area while the ma-
chine is running. Danger of
injury when coming into con-
tact with the cutting disc.
Wear ear protectors. Expo-
sure to noise can cause hear-
ing loss.
Wear safety goggles.
Wear a dust respirator.
Wear protective gloves.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
1 609 929 U62 | (8/24/10)
Intended Use
The machine is intended for stationary use with
cutting discs to perform lengthways and cross-
ways straight cuts or mitre cuts to 45° in metal
materials without the use of water.
Product Features
The numbering of the components shown refers
to the representation of the power tool on the
graphic pages.
1 Lock-off button for On/Off switch
2 On/Off switch
3 Handle
4 Retracting blade guard
5 Spindle lock
6 Cutting disc
7 Angle stop
8 Clamping spindle
9 Quick-release button
10 Spindle handle
11 Mounting holes
12 Base plate
13 Locking screw for angle stop
14 Ring spanner (15 mm; 13 mm)
15 Transport safety-lock
16 Depth stop
17 Tool arm
18 Transport handle
19 Blade guard
20 Spark guard
21 Tool spindle
22 Clamping flange
23 Washer
24 Hexagon bolt
25 Lock nut of the depth stop
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools