Table of Contents
Advertisement
5.9.3
Configuring the Trunk Settings
To configure the Trunk Settings, take these 9 steps:
Open the 'Trunk Settings' screen (Advanced Configuration menu > Trunk Settings); the
1.
'Trunk Settings' screen is displayed.
Initially, the screen appears with the parameters fields grayed (indicating read-only). The
Stop Trunk button appears at the bottom of the screen.
The Trunk Status indicators appear colored.
their descriptions.
To configure the parameters of a specific trunk, from the trunks displayed on the top, select
2.
the trunk you want to configure by clicking the Trunk's Status indicator. The first parameter
named 'Trunk ID' changes according to the trunk you click. The parameters displayed are for
the selected trunk only.
Mediant 2000 SIP User's Manual
Figure 5-17: E1/T1 Trunk Settings Screen
66
Table 5-7
shows the possible indicators and
Document #: LTRT-72504
Mediant 2000 SIP
Advertisement
Table of Contents
