Table of Contents
Advertisement
Mediant 2000 SIP User's Manual
5.9.2
Configuring the Channel Settings
The Channels Settings screen enables you to set the VoIP gateway channel parameters, such as
Input and Output voice gain, Jitter buffer characteristics, Modem, Fax and DTMF transport
modes. These parameters are applied to all Mediant 2000 channels.
Note that several Channels Settings parameters can be configured per call using profiles (refer to
Section
5.8.5
Note:
To configure the Channel Settings parameters, take these 4 steps:
Open the 'Channel Settings' screen (Advanced Configuration menu > Channel Settings);
1.
the 'Channel Settings' screen is displayed.
Configure the Channel Settings parameters.
2.
Click the Submit button to save your changes.
3.
To save the changes so they are available after a power fail, refer to Section
4.
84.
Note 1:
Note 2:
Version 4.4
on page 55).
Channel parameters are changeable on-the-fly. Changes take effect from
next call.
Figure 5-16: Channel Settings Screen
The parameters 'MF Transport Type' and the 5 Answer Detector parameters
are not applicable to the Mediant 2000.
The parameters 'DTMF Transport Type' and 'Fax Transport Mode' are
overridden by the parameters 'IsDTMFUsed' and 'IsFaxUsed' respectively.
65
5. Web Management
5.12
on page
July 2005
Advertisement
Table of Contents
