Software Requirements; Hardware Options - Meridian Nortel 1 Option 11C Technical Reference Manual

Software requirements

Hardware options

Table 99
Hardware features
Optional hardware
available
Accessory Connection
Module (ACM)
Note: X indicates the hardware available for the M3900 Series Meridian Digital Telephone.
European Digital telephones: 3110, 3310, and 3820
Programmable Feature keys
Each Meridian digital telephone has a number of programmable keys with
LCD indicators that can be assigned to any combination of directory numbers
and features. The M3820 has 13 fully programmable feature keys; the M3310
has seven, and the M3110 has eight. The lower right-hand key (key 0) is
reserved for the Primary DN.
LCD indicators support four key/LCD states:
Function
idle
active
ringing
hold
Note: An indicator fast flashes when you have pressed a feature key
but have not completed the procedure necessary to activate the feature.
Meridian digital telephones are supported by Release 16 and later software.
The package number for the Meridian digital telephones is (170.) The
mnemonic is ARIE. The DSET package (88) and the TSET package (89) are
required.
This section describes the options available for M3900 Series Meridian
Digital Telephones. Table 99 lists the features and optional hardware
available for each telephone.
M3901
NA
LCD state
off
on (steady)
flash (60 Hz)
fast flash (120 Hz)
M3902 M3903
x x
Option 11C and 11C Mini
Page 327 of 544
M3904 M3905
x x
Technical Reference Guide