Meridian Nortel 1 Option 11C Technical Reference Manual page 291

• handset/headset
• buzz
• on-hook dialing
When the telephone is disconnected, all volume levels will return to default
values upon reconnection.
When the telephone is operating on loop power alone, the highest (eighth)
step in volume cannot be reached (as seen when using Display in Program
mode).
Message Waiting lamp
Each Meridian Modular Telephone has a red triangle in the upper right-hand
corner that lights brightly to indicate a message is waiting. This LED is the
primary message waiting indicator and lets you know a message is waiting
regardless of whether the telephone has a message waiting key/lamp pair.
You must have Message Waiting CCOS configured.
If you do assign a message waiting key/lamp pair, there will be two
indications of a message waiting:
• the red Message Waiting triangle lights, and
• the LCD associated with the Message Waiting key flashes.
You may assign an Autodial key that dials the message center (or voice mail
system) to avoid the double indication, or have no key/lamp pair assigned to
the message center.
The Message Waiting lamp is also used to indicate security of the M2016S.
The red LED triangle lights steadily when the phone is not secure (handset is
off-hook, phone is ringing or any time the handset/piezo relays are
connected). The red LED triangle blinks when a message is waiting.
Handsfree (M2616 only)
Handsfree (if software assigned), allows the user to talk to another party
without lifting the handset. Activate Handsfree by depressing the Handsfree/
mute key (key 15, top left) or by selecting a DN without lifting the handset.
Once Handsfree is activated, it can be deactivated by picking up the handset
or by ending the call using the Release (Rls) key. If Handsfree is not software
assigned, you can assign any other feature to key 15.
Meridian Modular Telephones
Option 11C and 11C Mini
Page 291 of 544
Technical Reference Guide