Expansion Daughterboards For Ip Connectivity; Fiber Optic Cable - Meridian Nortel 1 Option 11C Technical Reference Manual

SDI Port
Each Fiber Receiver card supports one Serial Data Interface (SDI) port
allowing remote TTY access. See "SDI ports" on page 227 for further details.

Expansion Daughterboards for IP connectivity

• The NTDK83 dual port 100baseT IP daughterboard
• The NTDK99 single port 100baseT IP daughterboard
• The NTTK01 single port 100baseF IP daughterboard
• The NTTK02 dual port 100baseF IP daughterboard
NTDK83 dual port 100baseT IP daughterboard
The NTDK83 dual port 100baseT IP daughterboard has two 100BaseT IP
ports, and can be used to connect Point To Point or to a campus data network.
NTDK99 single port 100baseT IP daughterboard
The NTDK99 single port 100baseT IP daughterboard has one 100BaseT IP
port, and can be used to connect Point To Point or to a campus data network.
NTTK01 single port 100baseF IP daughterboard
The NTTK01 single port 100baseF IP daughterboard has one 100BaseF IP
port, and can be used to connect Point To Point or to a campus data network
with glass fiber optic cable. This is the glass fiber optic cable version of the
NTDK99 described above.
NTTK02 dual port 100baseF IP daughterboard
The NTTK02 dual port 100baseF IP daughterboard has two 100BaseF IP
ports, and can be used to connect Point To Point or to the campus data
network with glass multimode optic cable. This is the glass fiber optic cable
version of the NTDK83 described above.

Fiber Optic cable

The Option 11C cabinets can be located up to 3 km (1.8 mi) from the main
cabinet by using fiber optic cable. There are two types of connections:
• Plastic Fiber Optic cable
• Glass Fiber Optic cable
• IP connector cables
Cable specifications and interfaces
Option 11C and 11C Mini
Page 443 of 544
Technical Reference Guide