Table of Contents
Advertisement
Type 0, and press Enter to configure the IP address.
6
The IP address prompt appears.
0) Slot 0, Port 2, Public LAN
IP Address =
Subnet Mask = 0.0.0.0
Speed/Duplex = AutoNegotiate
*Type 0.0.0.0 to delete.
*Just type <CR> to skip.
Old IP address =
New IP address =
Type a new IP address, and press Enter.
7
The subnet mask prompt appears.
Old Subnet Mask = 0.0.0.0
New Subnet Mask =
8
At the New Subnet Mask prompt, type the subnet mask for the management
IP address, and press Enter.
The Speed/Duplex prompt appears.
Press Enter to leave the speed and duplex settings unchanged.
9
The Interface menu appears again with the changes you made.
0) Slot 0, Port 2, Public LAN
IP Address =
Subnet Mask = 0.0.0.0
Speed/Duplex = AutoNegotiate
1) Slot 0, Port 1, Private LAN
IP Address =192.167.120.14
Subnet Mask = 255.255.255.0
Speed/Duplex = AutoNegotiate
R) Return to the Main Menu.
Please select a menu choice:
Chapter 3 Configuring the management IP interface 57
Nortel VPN Router Installation — VPN Router 2750
Advertisement
Table of Contents
