Quad T1/E1 Csu/Dsu Wan Interface Card Leds; Figure 17 Leds On The Quad T1/E1 Csu/Dsu Wan Interface Card; Table 13 Led Indicators On The Quad T1/E1 Csu/Dsu Wan Interface Card - Nortel VPN Router 2750 Installation Manual

Nortel networks vpn router installation guide
Hide thumbs Also See for Nortel VPN Router 2750:
Table of Contents

Advertisement

Quad T1/E1 CSU/DSU WAN interface card LEDs

Figure 17
shows the LEDs on the quad T1/E1 channel service unit/digital service
unit (CSU/DSU) WAN interface card.

Figure 17 LEDs on the quad T1/E1 CSU/DSU WAN interface card

Table 13
describes the LEDs on the quad T1/E1 CSU/DSU WAN interface card.

Table 13 LED indicators on the quad T1/E1 CSU/DSU WAN interface card

LED
LED 1
LED 2
LED 3
LED 4
Chapter 2 Cabling the VPN Router and turning the power on 49
Indicator
Description
Off
Port 1 is disabled.
On
Port 1 is enabled and operating normally.
Flashing
Port 1 is enabled and in an alarm state (red, yellow, or blue).
Off
Port 2 is disabled.
On
Port 2 is enabled and operating normally.
Flashing
Port 2 is enabled and in an alarm state (red, yellow, or blue).
Off
Port 3 is disabled.
On
Port 3 is enabled and operating normally.
Flashing
Port 3 is enabled and in an alarm state (red, yellow, or blue).
Off
Port 4 is disabled.
On
Port 4 is enabled and operating normally.
Flashing
Port 4 is enabled and in an alarm state (red, yellow, or blue).
Nortel VPN Router Installation — VPN Router 2750
LED 1
LED 2
LED 3
LED 4
CS160012A

Advertisement

Table of Contents
loading

Table of Contents