Sharing Custom Picture Controls - Nikon D300S User Manual

Sharing Custom Picture Controls

Custom Picture Controls created using the Picture Control Utility
available with ViewNX or optional software such as Capture NX 2
can be copied to a memory card and loaded into the camera, or
custom Picture Controls created with the camera can be copied to
the memory card to be used in compatible cameras and software
and then deleted when no longer needed (if two memory cards
are inserted, the card in the primary slot will be used; 0 72).
To copy custom Picture Controls to or from
the memory card, or to delete custom Picture
Controls from the memory card, highlight
Load/Save in the Manage Picture Control
menu and press 2. The following options will
be displayed:
• Copy to camera: Copy custom Picture Controls from the memory
card to custom Picture Controls C-1 through C-9 on the camera
and name them as desired.
• Delete from card: Delete selected
custom Picture Controls from the
memory card. The confirmation
dialog shown at right will be
displayed before a Picture Control
is deleted; to delete the selected
Picture Control, highlight Yes and
press J.
• Copy to card: Copy a custom Picture Control (C-1 through C-9) from
the camera to a selected destination (1 through 99) on the
memory card.
A
Saving Custom Picture Controls
Up to 99 custom Picture Controls can be stored on the memory card at
any one time. The memory card can only be used to store user-created
custom Picture Controls. The preset Picture Controls supplied with the
camera can not be copied to the memory card, renamed, or deleted.
J
163