Webasto thermo pro 50 eco Operation Manual page 2

Introduction
Dear Webasto Customer,
Thank you for choosing the Webasto Thermo Pro 50 Eco Water Heater. We hope it will provide you with many
years of reliable comfort.
The heater Thermo Pro 50 Eco is used in conjunction with the original vehicle heating system for:
– cabin preheating
– engine preheating
– preheating of additional devices (e.g. units)
The auxiliary heating mode can also be operated with the vehicle engine running.
We presume that the principle and mode of operation of this product has been explained to your complete
satisfaction by the workshop/service center which installed it. In these operating instructions we would like to
once again provide you with an overview of the safe use of this product.
To become familiar with and understand all functions of the heater, you must read these
operating instructions carefully. Then you can be sure that you can use all functions to your
satisfaction and feel completely comfortable and safe. If you should lose these instructions, please
contact an authorized Webasto dealer immediately to obtain a replacement copy
(see also http://www.techwebasto.com).
Repair or maintenance work not described here may only be carried out by an authorized Webasto dealer.
2