Assigning The Security Code - Nortel T7406 Installation Manual

32 / Handset Configuration
6. Press .
The display shows
7. Re-enter the password.
8. Press .
The display shows
9. Press the Options button to exit the Option menu
The display changes to show the date and time.
Password errors
If you enter an incorrect password and the display shows
return to the
Lost password
Make a note of the new password. If you forget your password, you will
need to contact your Distributor for help to unlock the set.

Assigning the Security Code

After you assign the handset ID # to a handset, you need to configure
the handset to a base station.
Follow these steps to assign a Security code to the handset.
1. Press the Options button.
2. Press
3. Press
4. Press
shows
5. Enter the six-digit password (default 000000).
. The display shows
6. Press
7. Enter the six-digit Security code.
The display changes to show the code as entered.
8. Press to accept the code.
The display shows
If you are assigning a handset to an existing base, your handset is now
connected to the system.
P0606142 01
menu item and try again.
.
until the display shows
to assign a security code to the handset. The display
.
.
.
.
.
,
.