Overview Of Parts; Installation And Operation; Safety Instructions - Bartscher PRO 40T Instruction Manual

4.2 Overview of parts

Lid
Level indicator
Tap
Socket

5. Installation and operation

5.1 Safety instructions

WARNING! Electrical hazard!
Connect the device to a properly installed and grounded single power socket.
Never yank cord to disconnect from outlet.
Cable must not touch any hot parts.
•
See that the cable does not touch any heat sources or sharp edges. Do not let the cable
dangle over the counter edge.
•
NEVER fill hot water into the cold water tank.
•
Do not fill water into the hot device; wait until it has cooled down.
WARNING! Danger of burn!
During operation some parts of the device become very hot. In order to avoid injuries do
not touch any hot parts!
•
Do not use the device in case it does not function properly, has been damaged or dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the device or
personal injury, and further, the warranty expires.
Lid handle
Handle of water tank
Water tank
Temperature maintenance
control light (green)
ON/OFF switch with an
integrated control light of
connection to the mains (red)
- 21 -