Using The Manual Breast Pump With The; How To Assemble The Manual Breast Pump; When To Express Milk - Philips AVENT SCF310/13 Manual

5. Using the manual breast pump with
the Philips AVENT VIA feeding system
S imply replace the Philips AVENT feeding bottle with a
VIA cup and adaptor. To make the pump completely stable
insert the VIA cup into the VIA lid/stand.
6. How to assemble the manual
breast pump
S eparate all parts and ensure pump has been cleaned
and sterilised as in section 3:
1) W ash your hands thoroughly. Insert the white valve (g) into the pump
body (f) from underneath.
2) Place the pump body (f) onto the Philips AVENT feeding bottle (h).*
3) Twist gently clockwise until secure. DO NOT OVERTIGHTEN!
4) P lace the silicone diaphragm and stem (d) into the pump body (f). Make
sure it fits securely around the rim by pressing down with your fingers
to ensure a perfect seal. (This is easier if assembled whilst wet.)
5) P lace the forked end of the handle (e) under the silicone diaphragm
and stem (d) and push down gently on the handle until it clicks
into place.
6) C arefully insert the Let-down Massage Cushion (b) into the pump
funnel (f) making sure it is perfectly sealed all round the rim of the
funnel. (This is easier if assembled whilst wet.)
7) C lick the pump cover (c) onto the pump body (f). To make the pump
completely stable insert the bottle into the stand (i).
*ALWAYS insert the adapter ring when using a polypropylene bottle

7. When to express milk

1) I f possible, wait until your milk supply and breastfeeding schedule are
well established, normally at least 2-4 weeks after birth, unless told
otherwise by your doctor or breastfeeding advisor.
GB
3