Adaptive Mode - Samsung SSA-S3010 User Manual

ADAPTIVE MODE

In Adaptive mode, the fi ngerprint image will be automatically compensated in an attempt to increase the successful
recognition rate of fi ngerprint authentication.
1. Press the SETUP MENU button.
F10
4
2. Use the buttons
press .
ENT
4
3. Use the buttons
•
USE : If set, you can use the Adaptive mode
NOT USE : If set, Adaptive mode is disabled
4. When done, press
ENT

M
In Adaptive mode, it may take longer to recognize the fi ngerprint.

Registering and recognizing fi ngerprints in ADAPTIVE MODE, the red LED of the
optical sensor blinks multiple times while capturing the fi ngerprint.
IDENTIFICATION MODE
You can select the use of 1:N Identifi cation mode. In this mode, the product analyzes the input fi ngerprint against all of
registered fi ngerprint data without demanding the input of the card or ID number, then it decides to authorize or
unauthorized the access.
1. Press the SETUP MENU button.
F10
4
2. Use the buttons
press .
ENT
4
3. Use the buttons
•
USE : If set, you can use the Identifi cation mode
NOT USE : If set, Identification mode is disabled
4. When done, press
ENT
6
and to move to the ADAPTIVE MODE item and
6
and to select the use of Adaptive mode.
to save your settings.
6
and to move to the IDENTIFICATION item and
6
and to select the use of Identifi cation mode.
to save your settings.
2. ADAPTIVE MODE
NOT USE
2. ADAPTIVE MODE
NOT USE
2. ADAPTIVE MODE
USE
3. IDENTIFICATION
NOT USE
3. IDENTIFICATION
NOT USE
3. IDENTIFICATION
USE
English English _ 33