Samsung SSA-S3010 User Manual page 22

installation and external connection
- Connect all RS-485 ports of the product in parallel.
1. Connect the yellow RS-485 RTX (+) line of one unit to the yellow RS-485 RTX (+) line of another unit.
2. Connect the gray RS-485 RTX (-) line of one unit to the gray RS-485 RTX (-) line of another unit.
3. Set a unique communication address (COMM ADDR) for each unit.
- Connect one RS-485 port of the product to the RS-485/RS-232 converter
1. Connect the yellow RS-485 RTX (+) line to the RS-485 A port of the converter.
2. Connect the gray RS-485 RTX (-) line to the RS-485 B port of the converter.
3. Plug the 9-pin connector (RS-232) of the converter into serial port (
4. Install and launch the application (SAMS).

M
RS-485 connection supports multi-drop communications up to 32 units.
TCP/IP Communication Port Connection
To implement TCP/IP communications for the host PC, follow the steps below:
PC
1. Connect the RJ45 jack of the unit to the RJ45 plug, the LAN cable of the network system.
2. Set a unique communication address (COMM ADDR) for each unit.
3. Install and launch the application (SAMS).
22_
installation and external connection
TCP/IP
TCP/IP
Mon 01 / 01 / 2010 Mon 01 / 01 / 2010
10 : 30 : 20 10 : 30 : 20
1 2 3 1 2
F 1 F 2 F 3
4 5 6 4 5
F 4 F 5 F 6
7 8 9 7 8
F 7 F 8 F 9
0 0
ESC ENT ESC
F10 F11 F12
COM port)
of the host PC.
HUB
Mon 01 / 01 / 2010
10 : 30 : 20
3 1 2 3
F 1 F 2 F 3 F 1
6 4 5 6
F 4 F 5 F 6 F 4
9 7 8 9
F 7 F 8 F 9 F 7
0
ENT ESC ENT
F10 F11 F12 F10
F 2 F 3
F 5 F 6
F 8 F 9
F11 F12