Samsung SSA-S3010 User Manual page 58

advanced setup
READER MODE TIME SCHEDULE
READER #1 MODE TIME SCHEDULE
There are 3 reader modes (in READER #1) including ID Mode, ID+F/P Mode and ID+PW+F/P Mode. Unless
otherwise set specifi cally, all registered users should be verifi ed according to the reader mode in use. However
you may allow entry with card only during a certain time interval for all users.
For example, suppose you want to access the door by only presenting a card from 09:00 to 17:00 and use the
Fingerprint Verifi cation method for the rest of the time. And, you can do so by setting [READER1 MODE
SETTING] to ID+F/P Mode which will be general operation mode, and program a T/S Code "01" so that it can
include a time period between 09:00 and 17:00 for card access. And, link the programmed Time Schedule
Code 01 to the READER1 MODE Time Schedule setting.
F 4
1. Press the SETUP MENU button.
4
2. Use the buttons
press .
ENT
3. Use the numeric buttons to enter 2-digit code and press
•
T/S(Time Schedule) CODE : 00~10
•
If the entry is incorrect, the "INVALID NUMBER" message will appear.
•
The T/S Code "00" indicates no Time Schedule is to be applied.
READER #2 Mode Time Schedule
There are 2 reader modes (in READER #2) including ID Mode and ID+P/W Mode. Unless otherwise specifi ed, all
registered users should be authenticated to the reader mode in use. However you may allow entry with card
only during a certain time interval for all users.
For example, suppose you want to access the door by only presenting a card from 09:00 to 17:00 and use the
Fingerprint Verifi cation method for the rest of the time. And, you can do so by setting [READER2 MODE
SETTING] to ID+P/W Mode which will be general operation mode, and program a T/S Code "01" so that it can
include a time period between 09:00 and 17:00 for card access. And, link the programmed Time Schedule
Code 01 to the READER2 MODE Time Schedule setting.
F 4
1. Press the SETUP MENU button.
4
2. Use the buttons
.
ENT
•
It can be confi gured in the same way as READER#1 Mode Time Schedule
setting.
58_
advanced setup
6
and to move to the RD1 MODE
6
and to move to RD2 MODE
T/S item and
4.RD1 MODE
.
ENT
4.RD1 MODE
T/S and press
5.RD2 MODE
T/S
00
T/S
10
T/S
00