Samsung SSA-S3010 User Manual page 36

user management
To register the ID card along with your fi ngerprint
Follow the steps 1 through 4 in "To register the ID card" above
5. Set each of PW/TA/TB/C/RD/MA/MB/LV/FP.
•
For more information about each item, refer to "ID Registration Items" on
page 35.
•
Set FP to 1.
•
Press .
ENT
6. Place your fi nger on the fi ngerprint scanner.
7. Release your fi nger, then put your fi nger onto the fi ngerprint scanner
again when the light turns on.
8. Your ID and fi ngerprint will be registered.
To register the PIN number
F 7
1. Press the SETUP MENU button.
4
2. Use the buttons
press .
ENT
3. Press the button 2
•
For card registration, select the CARD to register the ID.
For PIN registration, select PIN and use the keypad to register the ID.
4. Use the keypad to enter the ID and press
5. Set each of PW/TA/TB/C/RD/MA/MB/LV/FP.
•
For more information about each item, refer to "ID Registration Items" on
page 35.
•
Set FP to 0.
6. ID registration is completed.

M
You can use the keypad to enter the ID in the following digits depending on the
model.
- PIN Range
SSA-S30x0 : Numeric letters in 4 ~ 8 digits
Ranges from 00000001 to 99999999
SSA-S30x1 : Numeric letters in 4 ~ 8 or 10 digits
Ranges from 0001 to 99999999, 0000000001 to 4294967295

36_
user management
6
and to move to the REGISTRATION item and
to select PIN.
.
ENT
1/2
TO REGISTER F/P
PUT YOUR FINGER
2/2
LIFT AND
PUT YOUR FINGER
FP QUALITY
Q_#1[4] Q_#2[4]
ID REGISTERED!
1. REGISTRATION
1. REGISTRATION
1:CARD 2:PIN
1. REGISTRATION
ID:
1. REGISTRATION
ID:1230001
PW_ TA TB C
RD MA MB LV FP
ID REGISTERED!