Samsung SSA-S3010 User Manual page 34

user management
REGISTERING ID IN QUICK MODE
To register ID
1. Press the SETUP MENU button.
F12
4
2. Use the buttons
press .
ENT
3. Use one of the following two ways to enter an ID:
•
Place the card on the main unit to display the card ID on the screen.
•
Use the keypad to enter the number and press
4. Enter the password and select whether to use the fi ngerprint and press
•
Set FINGER to 0.
5. ID registration is completed.
•
Registering in Quick mode will set TA and TB to 00, and RD, MA, MB, LV to 0.
(Refer to page 35.)
To register ID along with fi ngerprint
Repeat steps 1 through 3 in "To register ID" above.
4. Enter the password and select whether to use the fi ngerprint and press
•
Set FINGER to 1.
5. Place your fi nger on the fi ngerprint scanner.
6. Release your fi nger, then put your fi nger onto the fi ngerprint scanner again
when the light turns on.
7. Your ID and fi ngerprint are registered.
34_
user management
6
and to move to the REGISTRATION item and
ENT
(QUICK MODE)
1. REGISTRATION
.
1. REGISTRATION
ID:_
ENTER PIN
.
ENT
PUT ID CARD
1. REGISTRATION
ID:12345678
PASS WORD:_
FINGER :0-N, 1-Y
ID REGISTERED!
.
ENT
TO REGISTER F/P
PUT YOUR FINGER
LIFT AND
PUT YOUR FINGER
FP QUALITY
Q_#1[4] Q_#2[4]
ID REGISTERED!
1/2
2/2