H3C WX3000 Installation Manual page 36

Figure 3-15 Install slide rails
Step4 Hold the device by both sides of it and gently push it into the rack along the slide rails, as shown in
Figure 3-16. Verify that the bottom of the device is in firm contact with the slide rails.
Figure 3-16 Install the device using front mounting brackets and slide rails (1)
Step5 Fix the front mounting brackets on the front square-holed brackets of the rack using the M6 screws and
cage nuts. Make sure that the device is firmly fixed on the rack through the front mounting brackets and
slide rails, as shown in Figure 3-17.
3-10