Step2 As shown in Figure 3-5, use the screws packed with the front mounting brackets to fix the front mounting
brackets on the device.
Figure 3-5 Attach the front mounting brackets to the device
Step3 As shown in Figure 3-6, determine the device installation position in the rack and use screws and cage
nuts to fix the front mounting brackets on the front square-holed brackets of the rack.
Figure 3-6 Attach the front mounting brackets to the rack
(1) Front square-holed bracket
Installing the Device Using Front and Rear Mounting Brackets
Follow these steps to install the device using front and rear mounting brackets:
Step1 Put on an ESD-preventive wrist strap and verify that the rack is sturdy and properly grounded.
Step2 As shown in Figure 3-7, use the screws packed with the front mounting brackets to fix the front mounting
brackets on both sides of the device.
(2) Front mounting bracket
3-4