Transceiver Modules - H3C WX3000 Installation Manual

of the optical system and makes optical inter-connections more flexible.
Currently, the WX3000 series supports only LC connectors.
Figure 1-11 LC connector
When connecting a networking device using optical fibers, first make sure that the fiber connectors
will work with the optical transceivers.
Before connecting fiber cables, make sure that the optical power of the receiver end does not
exceed the upper threshold of the receiving optical power of the optical transceiver; otherwise, the
optical transceiver may be damaged. For the optical power specifications of the receiver end, refer
to Appendix A.

Transceiver Modules

The WX3000 series supports the following optical transceivers:
Table 1-11 Description of optical transceivers
Item
SFP transceivers
XFP transceivers
XENPAK modules
WX3024
FE SFP transceivers
GE SFP transceivers
GE BIDI transceivers
FE BIDI transceivers
Supports
XFP-SX-MM850
Supports
XFP-LX-SM1310
Supports
XENPAK-SX-MM850
Supports
XENPAK-LX-SM1310
WX3010
Supports SFP-FE-SX-MM1310-A
Supports SFP-FE-LX-SM1310-A
Supports SFP-GE-SX-MM850-A
Supports SFP-GE-LX-SM1310-A
Supports SFP-GE-LX-SM1310-BIDI
Supports SFP-GE-LX-SM1490-BIDI
Supports SFP-FE-LX-SM1310-BIDI
Supports SFP-FE-LX-SM1550-BIDI
Not supported
Not supported
1-10
WX3008
Not supported
Not supported
Not supported