Introduction ·············································································································································1 - H3C WX3000 Installation Manual

About This Manual
Organization
H3C WX3000 Series Unified Switches Installation Manual is organized as follows:
Chapter 1 Overview
Chapter 2 Preparing for Installation
Chapter 3 Installing the Device
Chapter 4 Starting and Configuring the
Device
Chapter 5 Maintaining Software
Chapter 6 Troubleshooting
Appendix A Specifications of Optional
Interface Modules
Appendix B Installation of Lightning
Arrester for Network Interfaces
Appendix C Installation of Lightning
Arrester for AC Power
Conventions
The manual uses the following conventions:
GUI conventions
Convention
Boldface
>
Chapter
Window names, button names, field names, and menu items are in
Boldface. For example, the New User window appears; click OK.
Multi-level menus are separated by angle brackets. For example, File >
Create > Folder.
Introduces the characteristics and appearance of the H3C
WX3000 Series Unified Switches.
Specifies the environmental requirements for installing
the H3C WX3000 Series Unified Switches, presents
installation precautions, and introduces the installation
tools needed.
Introduces how to install the H3C WX3000 Series Unified
Switches, how to connect the power supply units, the
console cable, and the Ethernet cable, and how to verify
the installation.
Introduces how to start and configure the H3C WX3000
Series Unified Switches, which involves how to set up the
configuration environment, how to connect the console
cable, how to set the terminal parameters, and how to
power on the switch.
Introduces how to maintain the software of the H3C
WX3000 Series Unified Switches, including BootWare
menu introduction, software updating, and password
recovery process.
Introduces the problems that may occur during the
installation and startup processes of the H3C WX3000
Series Unified Switches and how to troubleshoot these
problems.
Introduces interface modules supported on the H3C
WX3000 Series Unified Switches.
Introduces how to install a lightning arrester for network
interfaces.
Introduces how to install a lightning arrester for AC power.
Description
Contents