Baumatic BWR1005 Instruction Manual page 32

o Use a spanner to loosen and remove the two remaining transit
bolts.
o Replace the back plate on the rear of the appliance.
o The
transit bolts are shown in the
diagram opposite.
o You should use a spanner to
loosen and remove the top
transit bolt first.
o There is also a transit bar
across
appliance
removed.
o You should
grommets from
exposed once the transit bolts are removed.
location of
the top
which should
also remove the
the holes;
o Insert the plastic
caps
supplied, into the
holes
have removed the
transit bolts from.
the three
of the
be
rubber
these are
that are
that you
32