Table of Contents
Advertisement
Transformer operations
Locking your SD 60/70 into a single operational state
T
o select a single operational state for
your Lionel SD 60/70 (example: forward
only), y ou c a n d ea c ti va te the R 2LC's
sequencing function with the reverse unit
control switch.
Get your locomotive moving in the
desired direction, then slow it down with-
Using your SD 60/70 Electrocoupler in the
non-Command environment
T
o use your SD 60/70 Electrocoupler in
the non-Command environment, you
must first couple a piece of rolling stock
equipped with Lionel magnetic couplers
Magnetic coupler on the rolling stock coupled
to the rear of your SD 60/70
out stopping. Set the reverse unit control
switch to PROGRAM. The SD 60/70 is now
"locked" into your chosen direction.
operation, just slide the reverse unit control
switch back to RUN.
NO SMK
directly to your SD 60/70's electrocouplers.
The magnetic coupler on the rolling stock
will then react to the magnetic field gener-
ated by a Lionel remote-control track sec-
tion (available separately). Place your
rolling stock's coupler "trigger disc" over
the central coil of a remote-control track
section and press uncouple on the con-
troller. The magnetic field pulls the disc
downward, and the coupler opens.
Note!
Remote-control
track section
4
When you no longer want single-direction
RUN
Smoke Unit
PGM
(see page 7 for details)
SMK
Your SD 60/70 electrocouplers
will NOT open manually or by
using a remote-control track
section
Advertisement
Table of Contents
