Table of Contents
Advertisement
Transformer operations
Installing the Lionel no. 610-5906-001 sound activation button
T
o operate the bell and horn sounds when
operating your SD 60/70 with conven-
tional transformers, you'll need to install the
Black wire
For AC transformers lacking a horn/whistle button (two no. 5906s required)
Red wire
Lionel no.
610-5906-001
sound activation
button
(for horn)
The no. 610-5906-001 sound activation button (available separately) works with
Note!
any Lionel AC transformer except no. 6-4690 Type MW. Transformers made by
other manufacturers may not be compatible with Railsounds.
Customer's wire
to your transformer
Red wire
Lionel no. 610-5906-001
sound activation button for
activating the bell
For AC transformers with a horn/whistle button
Black wire
Lionel no. 610-5906-001 sound activation
button (available separately). Connect the
button(s) as shown below.
attach to ground terminal
attach to power terminal
All track power must feed through
Note!
"Sound Activation Button"
Do not bypass button
attach to ground terminal
Red wire
to your transformer
attach to power terminal
Lionel no. 610-5906-001
sound activation button (for bell)
5
Advertisement
Table of Contents
