Lionel SD 60/70 Owner's Manual page 8

Maintaining and servicing your SD 60/70
Replacing your SD 60/70's lamps
Rear Bulbs SD 60/70
Part #610-8238-029
To replace your SD-60/70's interior lights, cut the two leads of the expired lamp and remove it
from the lamp holder in the motor shroud. Route the two leads from the new lamp up and
through the lamp holder, reversing the path taken to remove the expired lamps. Cut approximately
1/4˝ of insulation off of each lead, twist the two leads together. Wrap this connection with insulated
tape to ensure a secure connection. Before you reinstall the cab, put your SD-60/70 on the track
and power it up to verify that the connection you made is a good one. When you have verified that
your mission was a success. Reinstall the cab and get back on the track!
Rear
Harness Location
in SD 60/70
Front
Rear Harness
Front Harness
Interior Lights
Part #610-8238-039
8
Front Ditch
Lights
SD 60/70
Front Lights SD 60
Part #610-8241-019
Front Lights SD 70
Part #610-8238-019