Network Setup (Non - Upnp) - Honeywell V2.X Installation Manual

Network Setup (Non - UPnP)

SKIP THIS SECTION IF UPnP IS ENABLED
If the router does not have UPnP enabled,
consideration needs to be given to whether the
site has a static or dynamic IP address and
whether the router has blocked the ports to the
DVR. The following steps will describe the
required actions depending on the configuration
of the customer's environment.
Once the DVR is turned on, the first screen
shows the connected cameras and also serves as
the entry point to other functions.
Right click on the screen and select "Menu" from the list. Click in the password box and use the virtual keyboard to
enter the password. Click on "Enter" when complete.
After logging into the system, the main menu will appear.
Honeywell HRGX Series Installation Guide rev 2.X I-View Now, LLC. All Rights Reserved. © 2014 Page 8