Honeywell V2.X Installation Manual page 10

Once within the General menu, several tasks will need to be performed.
1. Uncheck "Enable DHCP"
2. Enter a static internal IP in the IPv4 Address field and the Subnet Mask in the IPv4 Subnet Mask field. Note that
this is NOT the external IP address of the customer, but an internal IP address.
3. If the site's IT staff has a preferred DNS Server and Alternate DNS Server, enter these in the designated areas. If
not, Google's public DNS servers are typically used. Google's IPs are 8.8.8.8 for the preferred DNS Server and
8.8.4.4 for the Alternate DNS Server.
4. Set the server port to 8000
5. Set HTTP Port to 8001
6. Set the RTSP Port to 8002
7. Click "Apply" at the bottom right of the screen.
Honeywell HRGX Series Installation Guide rev 2.X I-View Now, LLC. All Rights Reserved. © 2014 Page 10