Honeywell V2.X Installation Manual page 20

8. Pre-record to 5s
9. Post record to 10s
10. Press "Apply"
11. Use the "Copy" button to copy these settings to all cameras
Be sure to make these setting changes in both columns were applicable.
Next, the Substream needs to be configured. The substream parameters are located under the Substream submenu
within the Encoding menu.
1. Set the Stream Type to Video
2. Resolution to CIF
3. Bitrate Type to Variable
4. Video Quality to Medium
5. Frame Rate to 6fps
6. Max Bitrate Mode to General
7. Max Bitrate (Kbps) to 128 (4 & 8 channel) and 192 (16 channel).
8. Click Apply
9. Using the Copy button, copy this configuration to all cameras.
Honeywell HRGX Series Installation Guide rev 2.X I-View Now, LLC. All Rights Reserved. © 2014 Page 20