Chapter 2: Engineering Mode; Engineering Mode - Horizon Fitness 612T Service Manual

CHAPTER 2: ENGINEERING MODE

2.1 Engineering Mode

1) To enter Engineering Mode, press & hold the SPEED UP and DOWN keys at the same time for 3-5
seconds until Engineering Menu appears on the display.
2) Use the SPEED UP and DOWN keys to scroll through a list of modes.
3) Press START to enter a mode.
4) Use the SPEED UP and DOWN keys to change the parameter.
5) Press the START key to save the change to the parameter.
6) Press and hold the STOP key to exit Engineering Mode and return to normal operation.
4