Vermeiren L3-Carpo 3 Instruction Manual page 22

Head rest:
Gently press the locking pin toward the head rest.
•
Move the head rest to the desired height.
•
Now let go of the locking pin again.
•
The head rest audibly locks into place.
•
L
Never perform adjustments while you are driving.
ARMRESTS
The width of the seat can be changed by adjusting the arm rests.
Loosen the screws under the seat.
•
Now pull or push the entire arm rests to the desired position.
•
Properly tighten the screws again.
•
The arm pads can be folded backward.
1
H
I
SCOOTERS Instruction Manual
1 = Locking pin
L
Do not pull out the arm rests so far
that there will remain insufficient
space to retighten the screws.
L
Never perform adjustments while you
are driving.
Last updated: Feb-09
G
6