Vermeiren L3-Carpo 3 Instruction Manual page 21

Adjusting the height of the seat (diagram E)
Loosen the fixing screws to adjust the seat height.
•
Pull out the safety pins.
•
You can now adjust the seat up or down.
•
Insert the safety pins again and secure them with the attached loop by putting the loop over the
•
end of the pins. This ensures that the pins have been inserted completely.
Properly tighten the seat height fixing screw again.
•
3
L
Never perform adjustments while you are driving.
L
Make sure that the seat is locked in place securely.
BACK
A tilt lever has been added to the side of the back rest (transition to seat upholstery). Press this lever
down to release the backrest and fold it forward.
2
1
2
4
3
1
SCOOTERS Instruction Manual
1 = Seat guide
2 = Skid pipe height adjustment
3 = Fixing screw of seat height
4 = Safety pin
1 = Seat system
2 = Tilt lever
3 = Head rest
Last updated: Feb-09
E
F
5