Vermeiren L3-Carpo 3 Instruction Manual page 20

NEUTRAL
Put the motor stop lever on neutral (see label). This separates the motor from the gears. You will
•
now be able to push the scooter.
Put the motor stop lever on drive. This will again interlock the motor and gears. You will now be
•
able to again drive the scooter.
Motor stop lever
L
Never put the scooter in neutral while you are driving.
L
To prevent the motor from overheating, never pick up the electronic drive before stopping the
motor/gears.
SEAT
Removable seat (diagram D)
Pull the seat lever (red) up.
•
Pull the seat up and out.
•
Locking the seat in place (diagram D)
Do the reverse when you want to replace the seat.
Put the receiver on the seat guide and press as far down as it will go (gentle to and fro turning of
•
the seat will facilitate the process).
When you hear the seat lock in place, the seat lever (red) must be in a horizontal position. If it is
•
still pulled upward, the seat has not been locked in place yet.
Swivel seat (diagram D)
Height adjustment (diagram D)
Pull upward the lever used to adjust the seat height.
•
Move the seat forward or backward.
•
To lock the seat in place, let go of the lever once the seat has reached the desired position.
•
3
5
6
Pull the seat lever (red) up.
•
Turn the seat in the desired direction.
•
Let go of the seat lever, and the seat will
•
always stop after 90°.
1 = Seat
1
2 = Seat depth rail
3 = Seat depth adjustment lever
2
4 = Receiver
5 = Seat guide
6 = Seat lever (red)
4
SCOOTERS Instruction Manual
Last updated: Feb-09
Neutral
Drive
C
D
4