Remote/Media Status Screen - Sony PMW-EX30 Operating Instructions Manual

Solid-state memory recorder
Hide thumbs Also See for PMW-EX30:
Table of Contents

Advertisement

i.LINK Out: HDV/DV output status
Displays the output status of the
DV connector (HDV, DVCAM, or off)
depending on the "i.LINK I/O Select"
setting of the VIDEO SET menu.
82

Remote/Media Status Screen

Remote/Media
HDV/
Status Screen
The remote/media status screen displays the
status of the IR remote commander,
remaining space of the media and available
recording time.
REMOTE/ MED I A
IR REMOTE
Battery
HDD A
HDD B
Media A
Media B
IR REMOTE: IR remote
commander status
Displays the status (ON: enabled, OFF:
disabled) of the IR remote commander.
HDD A/HDD B: Battery remaining
of PHU-60K/120K/120R units
Display the remaining power levels of the
batteries of the PHU-60K/120K/120R units
connected via the respective card slots
when PHU-60K/120K/120R Professional
Harddisk Units are connected.
Media A/Media B: Remaining
space of the media and available
recording time
The remaining space of the SxS memory
cards in the respective card slots are
indicated on the meters.
At the right of the remaining space meter,
the available time for recording if done at
the current bit rate is displayed, in minutes.
The time indication will be "- - min" if no
SxS memory card or an invalid card is in the
slot.
If the card is write-protected, "Protected" is
shown to the right of the available recording
time indication.
:On
0
50
100%
20min
50min Protected
3 / 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents